Sunday 3 January 2016

Tatting Effects & patterns

Pin It now!

Mixed Effects

I usually like to post when there is something substantial or complete to offer.  This time I'm making an exception coz I don't know how soon I'll be able to prepare proper posts ...
These are a few effects I came up with over the last few months. Haven’t had much time or patience to develop or refine them . I also wanted to share something ‘new’ (I hope) at the start of the new year.
So, here's a sneak peek at some of the effects I have in the works (some my own, some borrowed) ... these are still in experimental stage & some kinks to be worked out … but they are pretty simple .

1. MAGIC  CIRCLE /RING
Crochet & knitting have a magic circle/ring, ...so why not tatting ? Should we be left behind ? Nnnnnoooooooo!
All one needs is a loop with a slip knot OR a simple length of scrap thread (if one wants decorative, use different colour, or a ribbon, etc.) . Skip the central ring in the pattern. Begin tatting the pattern & when it says to join in center or to a central ring, join instead to this loop – a normal picot join. That’s it ! Take care not to pull the loop thread through when tensioning the join. In end, tighten the slip knot & hide tails.
This was back in October but it took a while to think of wider application & usefulness. I believe it has potential for designers to estimate round size, or how many repeats can fit in a certain diameter, ... as well as for tatters faced with certain situations – such as not having the right sized finding/doodad/button ; to cover tree ornaments (baubles) easily (slip on/over & tighten !); estimate girth of suncatcher, etc….. Join many individual motifs to the magic string to make a bunting or a necklace!
The magic circle can't even be seen if pulled tight. But if one wants it to show, That's possible too.
**************

2. RINGS  ENRAPT / WRAPPED RINGS
A wrapped-around effect for rings, worked with only 2 shuttles normally.
The wrapping itself is Very easy & can be applied to any single shuttle ring (Not split rings, though) with or without picots.
Start ring. Make 1st half stitch But before tensioning it, pass SH2 through, along the core ((just as we do when hiding tail within)). The continue tatting normally. Before closing ring, pass SH2 through the ring, wrapping around it. Close ring normally & continue.
The wraps can be made on picoted rings too (topmost ring in above pic). If one wants the wrap Within a picot, one will need to position SH2 before starting the picot.
This effect can be a bit fiddly at times since the wrap does not slide easily over the double stitch & may have to be nudged into position.
Secondly, if one chooses to place colours in a certain way, there is a tendency for the wrapped thread to be pulled tight accidentally (unless one uses a shoelace trick). So this is a ‘flaw’ I need to fix with a few experiments. I have a few advanced effects in mind for this … let’s see.
Also tried the blanket stitch for fun :-) I like the look in the 2nd pic, where the picots make a nice angle & also anchor the wraps. It is fine to decorate a single ring but I wouldn’t recommend it for multiple rings – it is very difficult to obtain tension, being a topstitch.

UPDATE : This basic wrap was applied to bare thread / mignonette in order to use 2 colours in same round and add some bulk : http://tipsaroundthehome.blogspot.com/2016/02/identity-crisis.html

************** 

3. OVERLAPPING SPLIT RINGS
aka
FAUX CELTIC TATTING
Simple split rings (SR) ! 3 in a series, joined back at base of 1st SR.
Gives a ‘free swinging’ middle (top) ring. This has potential for 3D tatting, where one or more rings can be joined to picots on topmost ring, thus providing an enclosed cylindrical or barrel shape (something like the layered rings here but where the lower rings/petals are vertical too !). Tatted Bugle beads ?!!!  Or 3D flowers of course. 
If the stitches on the 2nd half of each split ring are increased, one gets this overlap in center. Imagine if one were to use 2 thread sizes – 20 for 1st half of SRs that form a peripheral outline ; & size 40 for 2nd half of SRs that give a clear overlap. Experiment with more number of rings to see what kind of overlap one gets. Look Ma, no Celtic shuttles ! 
**************

with a ‘double twist’
(This is not my original idea, hence post titled “Mixed” effects).
There are 3 tatted pin links here (excuse my shabbiness – first attempts) :
2. Using 2 colours,  and chain reduced to 18ds
3. Doubled up chain . One can add a vsp to chain & join before starting 2nd ring.

4. Further Ideas : use 2 thread sizes - thicker rings & thinner chains. Make a separate ring or use a metal ring. Wrap the cotter pin chain all around the ring/large chain, covering it completely.  Something like enraptured ring – this is something I really want to try out – it would look so nice as the center of a flower or around a cabochon, pearl, etc. !
**************

Ending with a quick & easy pattern using daisy picots to welcome the new year ….
DOUBLE  DAISY  FLOWERS

Very quick to tat & use up scraps of thread. Daisy Picot technique.
2 shuttles.
Pattern :
(Form ring loop with SH1)
Sh1 : 1ds, p, 1ds
Sh2 : long picot, 1ds
Repeat from
for 6 'petals'.
Close ring. T & C !
These flowers are going to be sewn to an embroidered neckline, hence I left the tail ends long, to be sewn through the fabric later.
Notice the difference between front (top & bottom pics) and back (above pic) of flower ? 
Which do you prefer ? 
**************
That’s it for this post. Still left with a lot of experimentation & trials & ideas to work on … hope some of the above inspire or generate even more & much better ideas


happy tatting :-)

Motifs #16-20 / III for 25 Motif Challenge

20 comments:

  1. A great post to start 2016 off :). Love the little double daisy flowers :). They would look beautiful sewn to a neckline :).

    ReplyDelete
    Replies
    1. Thanks Jenn :-)) Yup, the flowers do seem to perk up the embroidery … need to get back to it ;-p

      Delete
  2. My favorite is the overlapping split rings, very pretty. You know I think lots of snowflakes are edgings that are gathered up like your first example. You have done a fine job of experiments once again you inspire us :)

    ReplyDelete
  3. What fun it is to see you having fun with tatting! Hehe. ;-D

    ReplyDelete
    Replies
    1. Absolutely right, amigo :-D
      Wish I could spend more time on these, Grace ... my hands hold the crochet hook while my head is still thinking about tatting ;-P

      Delete

  4. Thank you for your visit, happy new year.
    Beautiful tatting!

    ReplyDelete
  5. Lovely effects! Everything is nice and usable!

    ReplyDelete
    Replies
    1. I am So glad you think so, Ninetta ! Thanks :-)))

      Delete
    2. I had forget those wrapped rings! Thank you for refreshing memories!

      Delete
    3. I'm sure you'll come up with something "effect"ive, Ninetta :-)
      Can't wait to see them come alive with your shuttles !

      Delete
  6. You certainly do have a lot of ideas! Thanks for sharing them. I really do look forward to your posts, because they are so informative. The technique I really want to learn this year is Marilee's cotter pin. I am intrigued by those wrapped rings. There is always so much to learn!

    ReplyDelete
    Replies
    1. And the cotter pin links are actually so brilliantly simple but give a stunning effect, Diane ! Of course I need tons of practice to get them as neat as Marilee's ;-/
      Sweet words of encouragement, thanks :-)

      Delete
  7. That's a big start to the new year, I love your daisy flowers, I want to try those as soon as possible and I also want to try Marilee's cotter pins too, oh so much to try.
    Looking forward to what else you have lined up this year.
    Margaret

    ReplyDelete
    Replies
    1. Thanks a heap, Margaret :-) We seem to be perpetually running yet can't keep up with all the new (& old) things to try out !
      I hope I can keep inspiring, helping, sharing, enjoying this year as well :-)

      Delete
  8. Lots of neat ideas here. I like the overlapping split rings. I imagine this type of experimentation is what led tatters to come up with new techniques in the past.

    ReplyDelete
    Replies
    1. I would think so too, Robin ... try out any wacky idea you get -- some may work, some won't, some might need modifications .
      The overlapping rings seem to be the common favorite here & in Craftree :-)

      Delete